
Used Snap-on tools do sell at auction: seven of the 12 results we verified from our September 2026 sale were Snap-on lots. Those are past results from one sale, not a forecast. What bidders weigh is a readable stamped part number, a set kept together, and whether the tool works.
Socket runs on their trays, a set of wrenches, a road chest and a battery charger: those were the Snap-on lots among the 12 results we verified from our September 2026 estate collection sale. They are past results from one sale, though, not a promise of what the next set will bring.
What decides the bidding is not the red paint. It is what is stamped on the steel, whether a set is still together, and whether the tool works. This guide covers all three, for families clearing a mechanic's garage and for bidders deciding how high to go. If you are settling a whole household, our guide to what an estate auction is is a good first read.
What used Snap-on tools brought in our September 2026 sale
Auction 778063, our Estate Collection Online Auction, ran September 15 to 21, 2026, with 552 lots. We read these hammer prices from the closed catalog on October 19, 2026.
| Lot | What the catalog listed | Sold (past result) |
|---|---|---|
| 428 | Snap-on RRA62 series road chest, lift lid, pull-out drawers, with key | $200.00 |
| 263 | Snap-on IM320 down to IM120 impact sockets, sized 1 inch down to 3/8 inch, 6-point | $180.00 |
| 494 | Snap-on IMFML 24 to IMFML 8 metric shallow sockets, 6-point, 3/8-inch drive, with Snap-on tray | $160.00 |
| 480 | Snap-on OEX 26, 24, 22, 20, 18 and 16 wrenches, SAE, 12-point | $132.50 |
| 258 | Snap-on 1/2-inch drive SAE 6-point sockets, 11 in all, with Snap-on holding tray | $122.50 |
| 394 | Snap-on SFS-281 to SFS-081-6T, SAE, 3/8-inch 6-point deep sockets | $107.50 |
| 429 | Snap-on BC4200 fast charger, works, on wheels | $102.50 |
Hammer prices from the closed catalog of auction 778063, read October 19, 2026. Past results from one sale, not estimates. They leave out the 4% credit card fee, 5.5% Wisconsin sales tax where it applies, and any shipping.
Two things stand out. Most of these lots were runs of one kind of tool, kept in order on a rail or tray, and every listing named a part number, a series or a model. The one lot that was not hand tools or storage, the BC4200 charger, was listed as working. For how the card fee, tax and shipping sit on top of a hammer price, see what a buyer's premium is (we charge none).
A Wisconsin brand, and a warranty that stays with the first owner
The brand is a Wisconsin story. The company's own history page traces it to 1920 and Joseph Johnson, an engineer from Milwaukee, whose first product was five handles and ten sockets that snapped on interchangeably, sold as "Five do the work of Fifty." In 1929 the company bought land on the outer edge of Kenosha, where the same page places its headquarters. In 1990, it says, the company became the first mobile tool company in the U.S. to convert to a franchise operation.

Here is the part families and bidders often miss. Snap-on's Terms and Conditions of Sale say its warranty "only extends to the original Customer and cannot be transferred or assigned." A used wrench is bought for the steel, not for the maker's warranty. Questions about coverage on a particular tool belong with the maker, not with us.
That fits how our sales work anyway: everything sells as is, where is, with no warranties. Dorshorst Auctions is not affiliated with Snap-on; we use the name because it is stamped on the tools people bring us.
The Stamp, Set and State check for used Snap-on tools
Here is a simple way to read any used tool lot. It is our editorial guide, not a measurement or a grading system: three questions, asked in order. Sellers can use it to see which details to leave alone and which to mention at the free consultation.
Stamp: what the steel says
Look at the wrenches in lot 480 below: the stamps read OEX26, OEX20, OEX18 and so on. A stamp like that tells a bidder the size, the point count and the style without any guessing, which is why our listings carry them. If you are selling, the stamps are the detail to keep readable. Do not grind, buff or clean them up; leave every tool as it is until Marv has looked at it.
Set: is the run still together?
A run of sockets kept in order on its rail lets a bidder check at a glance which sizes are there and which are not. Lot 258 was 11 SAE sockets on their holding tray; lot 494 was a metric run with its tray. Leave sets on their rails and tools in the drawers they live in. A scattered set is hard to put back together once it leaves the garage.
State: does it work?
For anything with a cord, a battery or a mechanism, say what you know. Lot 429, the BC4200 fast charger, was listed as working. In the same sale, a fish finder in lot 312 was listed as "not tested," which is the honest answer when nobody knows. An honest "not tested" beats a guess every time.
| Check | What a bidder looks for | What a family can do |
|---|---|---|
| Stamp | Brand and part number readable on the steel | Leave stamps as they are: no buffing, grinding or engraving |
| Set | A run in order on its rail or tray, gaps easy to see | Keep sets together and tools in their drawers |
| State | Works, or honestly marked not tested | Tell Marv what you know about each powered tool |
Our editorial guide, not a measurement or a grading standard.
Selling Snap-on tools from an estate: a short checklist
Families often inherit a whole garage in the same weeks as a funeral and a house closing. You don't need to sort it before you call. These steps help:
- Confirm who can sell. For a small estate, read our guide to transfer by affidavit in Wisconsin; otherwise, ask the estate's attorney or personal representative.
- Don't throw anything away, odd sockets and tired-looking tools included, until Marv has looked. The items people assume are worthless are often the ones that draw the most attention.
- Leave everything as it is: no cleaning, oiling, re-sorting or re-boxing. Sets on their rails and tools in their drawers show bidders what is there.
- Keep the extras with the tools: keys for a chest (lot 428 sold with its key), plus manuals and chargers for battery tools.
- Write down what you know, such as whether a charger or power tool worked the last time it was used.
- Call Marv at (608) 628-1631 or use the seller form to book the free consultation.
A single chest or one collection of tools can be consigned into one of our sales; our guide to the consignment auction explains how that differs from a full estate sale. Tools rarely come alone, either. If the garage also holds old hand planes, saws and levels, see what to do with old tools, and read estate cleanout before anything else leaves the house.
Buying used Snap-on tools at our auctions
All bidding runs online through HiBid, and lots close on a one-minute soft close: a bid in the final minute pushes that lot's close back another minute. You can set a max bid and let HiBid bid for you in standard increments, and it emails you if you are outbid. Before you bid on a socket set or a chest:
- As is, where is. Everything sells with no warranties, and the maker's warranty does not follow a used tool, so read the description and study every photo.
- Preview by appointment. Call Marv at (608) 628-1631 to look at a chest or a socket set before you bid.
- Your total. No buyer's premium, a 4% credit card transaction fee and 5.5% Wisconsin sales tax where it applies. On a $100 hammer price, for example, the card fee is $4.00.
- Pickup or shipping. Pickup is in the posted window in Deerfield. Small lots can ship for a $10.00 handling fee plus the actual USPS or UPS cost; larger lots are pickup only.
That 5.5% is Wisconsin's 5% state sales tax plus Dane County's 0.5% county tax, according to the Department of Revenue's sales tax rate chart. For what happens in the last minutes, read our note on the soft close.
What past results can and can't tell you
Seven results from one sale make a useful snapshot, not a price list. The same socket set can draw different bidding in a different week, with different bidders and in different condition. Asking prices posted online are not sold prices, either. We don't put a value on tools or estimate what a set will bring. What we do is number, describe and photograph every lot, so bidders can judge it for themselves.
Browse our past auctions to see how tool lots are written up, check current auctions for what is open or coming, and sign up for email alerts to hear when the next catalog opens. If the tools are yours to sell, start with the free consultation.
Common questions
Do used Snap-on tools still have a warranty?
Snap-on's Terms and Conditions of Sale say its warranty only extends to the original customer and cannot be transferred or assigned. So plan on buying a used tool without the maker's warranty, and ask Snap-on directly about any specific tool. At Dorshorst Auctions, everything also sells as is, where is, with no warranties.
Where can I sell my dad's Snap-on tools in Wisconsin?
Dorshorst Auctions takes single collections, tools included, on consignment into its online sales from Deerfield, in Dane County. Call Marv at (608) 628-1631 for a free, no-obligation consultation. Leave the tools as they are, in their drawers and on their rails, and don't throw anything away until he has looked.
Should I sell Snap-on sockets as a set or one at a time?
Keep sets together until Marv has seen them, and settle how the tools are grouped at the consultation. In our September 2026 sale, several Snap-on lots were runs of sockets on their rails or trays, each sold as one lot. A run kept in order lets a bidder see quickly which sizes are there.
How can I tell what Snap-on tool I have?
Read the stamp. The wrenches in our lot 480, for example, carry part numbers such as OEX26 and OEX20 stamped into the steel, and our listings repeat those numbers. If a stamp is worn or a tool is unmarked, don't scrub it. Write down what you can read and let Marv look.
Is there a buyer's premium on tool lots at Dorshorst Auctions?
No. Dorshorst Auctions charges no buyer's premium. Your invoice can include a 4% credit card transaction fee, 5.5% Wisconsin sales tax where it applies, and shipping on small lots at a $10.00 handling fee plus actual USPS or UPS cost. Larger lots are pickup only.
Can I look at a Snap-on tool chest before I bid?
Yes, by appointment. Previews are arranged with Marv by phone at (608) 628-1631. Everything sells as is, where is, with no warranties, and every bid is a binding offer to purchase, so check drawers, slides, lids and keys in person or study every photo before you set a maximum bid.
Sources
- Our History, Snap-on Incorporated
- Terms and Conditions of Sale, Snap-on Incorporated
- Tax Rates: Sales Tax Rate Chart, Wisconsin Department of Revenue